Choose Your Country:

Coming Soon
Coming Soon


PainPod 3 - how to use s PainPod 3

PainPod® 3 at a Glance

1ON/OFF Switch
2USB Port
3 Time Remaining
4 Battery Indicator
5 Modes
6 Intensity Level
7 Select Channel
8 Select Mode
9 Select Time
10 Increase Intensity
11 Decreases Intensity
12 Port A
13 Port B

This PainPod 3 is a simple device which can be easily applied to different locations around the body to alleviate pain, improve muscle condition and support overall health. By selecting different modes, choosing varied intensity levels and consulting the placement chart you can personally determine the most comfortable and effective way to use the PainPod.

Please take the time to read this instruction booklet and all other information leaflets included with this device.

Step 1

Insert the electrode wires into ports A and B.

plug the electrode wire into the PainPod 3

Step 2

Connect the desired pads to the electrode wires as shown.

connect the electrode wire to the PainPod pads

Step 3

Attach the pads to the desired area of your body.

Stick the PainPod pads at the point of pain

Step 4

Switch on the unit using the ON/OFF switch.

turn the PainPod on | PainPod 3 Medical Device

Step 5

Select which group of electrode pads to control using the A/B button.

Choose the port you are using | PainPod 3 how to use

Step 6

Select the desired Mode using the ‘M’ button.

choose the PainPod mode you like best | PainPod 3 how to use

Step 7

Increase/Decrease the intensity to a comfortable level using the + / - buttons.

select the intensity of treatment on your PainPod 3

Step 8

Select a desired time limit or treatment duration using the ’T’ button.

Add mode time to your sessions | PainPod 3

Cleaning and Maintenance

  • Make sure your skin is free from any dirt, oil or lotions before placing the PainPod electrodes. Using sanitary wipes is recommended.
  • Before applying the pads or turning the device on, put a few drops of water on your fingers and rub them on both pads. This will help maintain their adhesiveness.
  • When you have finished using the unit, turn it off to preserve battery life.
  • Place the protective film back on the pads or place them on the pad holder after each use.
  • Store the unit in a cool, dry place. Avoid storing in high temperature, high humidity, high electrical activity areas or direct sunlight.

Charging The Battery

  • The internal rechargeable lithium battery can be charged using the provided AC adaptor or through the USB port of your computer.
  • The unit may need to be charged if the screen is dim, the sensations are weak or if the display on the screen does not appear when turned on.
  • The PainPod normally takes around 2 hours to fully charge.

User Manual

Placement Chart